Electrical

Molded nylon encases 6 or 12 pairs of connectors that use screw compression to secure wires without use of lugs. ideal for electronic installations. Brass barrels capture wires and are held in place with a stainless steel ?finger" compressed by a screw...

Displays volts, amps, energy used and remaining for 12 or 24 volt systems up to 500 amps and up to 3,000 amp-hour capacity. Makes DC energy management a breeze. Monitor voltage on up to three separate banks. House bank (or battery bank of choice) may be...

DX Series Feed-Thru Waterproof Fittings Provided with solid neoprene cable gland, installer drills holes and slits as required to accommodate cable with or without factory installed connector. Multiple cables may be passed through a single fitting. ...

DX-3 Feed-Thru Waterproof FittingProvided with a solid neoprene cable gland, the installer drills holes and slits as required to accommodate cable with or without a factory-installed connector. Multiple cables may be passed through this single fitting...

The Emergency Relay/Charger is a device for assuring immediate back-up power to communications equipment in the event AC power is temporarily lost to the power supply or the supply fails. In addition it will allow the power supply to act as a ?trickle?...

ERC-12-15 Emergency RelayThe Emergency Relay/Charger is a device for assuring immediate backup power to communications equipment in the event AC power is temporarily lost to the power supply or the supply fails. In addition, it will allow the power...

The Emergency Relay/Charger is a device for assuring immediate back-up power to communications equipment in the event AC power is temporarily lost to the power supply or the supply fails. In addition it will allow the power supply to act as a ?trickle?...

ERC-12-35 Emergency RelayThe Emergency Relay/Charger is a device for assuring immediate backup power to communications equipment in the event AC power is temporarily lost to the power supply or the supply fails. In addition, it will allow the power...

ES-1 Elite DC Panel This DC master control panel offers a large DC circuit capacity and can be installed by itself or in conjunction with the ES-2 panel to make a complete AC-DC control and monitoring system. Features:Analog DC volt and...

ES-7D Elite DC PanelThis panel is designed for expanding AC or DC circuit capacity on any Elite Series panel, or it may be used as a stand-alone load center.Features:AC (120/240V) or DC (12/24V) master breaker (double pole AC 50 amp* standard, 30 amp...

Newmaqr 30 Amp Galvanic Isolator with Fail SafeModel: GI-30-FSCommonly installed on cruisers, sailboats, and yachtsProtects against corrosionMaintains a safe environmentCertified to UL1500 standard for Ignition ProtectionTested to 50°C ambient...

GI-30-FS Galvanic Isolator 30A Fail SafeInstalling the Galvanic Isolator between the AC safety ground and DC bonding system blocks most of the low-voltage currents and corrosive action seen on the vital metallic components in the saltwater. With the low...