Navigation

M285HW Chirp In-Hull 1kw TransducerRequires Mix and Match CableThe M285HW, is a 1kW, economical Chirp transducer designed for offshore fishing and freshwater anglers. Operating at the high frequency range of 150-250kHz and a fixed wide beam of 25...

Mix & Match Cable for Raymarine 600W Non-CHIRP TransducersMix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-specific adapter cable. The short pigtail...

MM-8G Mix & Match Cable for 600W Non-CHIRP TransducersMix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-specific adapter cable.The short pigtail attached to...

MM-9N Mix & Match Cable for Simrad XSONIC Non-CHIRP TransducersMix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-specific adapter cable. The short pigtail...

MM-HB Mix & Match™ Cable 5-Pin 600W Series with Humminbird #9 Connector - 9MSpecifications:Sensor Connector: MMDisplay Connector: HBMix and Match Series: 5-Pin 600 WattCountry of Origin: USACable-Length: 9 m (30')

Navico 7-Pin Blue Mix & Match Chirp Cable - 1MAirmar's Mix & Match Chirp Cable for Navico.Features:Length: 1M7-PinColor: BlueThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any...

Navico 9-Pin Dual Mix & Match Cable for Dual Element TransducersFor dual-socket Navico/Lowrance/Simrad xSonic 9-pin equipment Mix and Match Cables for CHIRP TransducersMany CHIRP transducers are now made as Mix and Match models. These versions have a...

Navico 9-Pin Mix & Match Chirp Cable - 1MAirmar's 9-Pin Mix & Match Chirp Cable for Navico Med and High or Highwide TransducersFeatures:Length: 1M9-Pinfor Med, High, and Highwide Transducers, Single Chirp TransducersThis product may not be...

Navico Mix & Match Cable for Low-Frequency CHIRP Transducers - 9-PinSpecifically for use with Airmar's Mix and Match CHIRP transducers up to 1kW (1,000W).This product may not be returned to the original point of purchase. Please contact the...

NMEA 0183 USB ConverterEnables NMEA 0183 data from an Airmar weatherstation or GPS/compass to be sent to a PC through a USB port. USB cable (1.8m/6') and power cable (1.8m/6') attached.This product may not be returned to the original point of purchase. ...

NMEA 0183 Weather Station Cable - 15MWith NMEA 0183 output only. End in an Airmar 8-Pin connector which can be removed for connection to bare-wire devices.This product may not be returned to the original point of purchase. Please contact the...

NMEA2000 Cable - 10MWeatherStation cables are available in four versions: NMEA 0183, NMEA 2000, combined NMEA 0183 and 2000, and Furuno NMEA 0183. All cables have a round white connector at one end that fits into the base of a weather station.NMEA 2000...