Navigation

Actisense NMEA 2000® Small Boat NetworkModel: A2K-SBN-2Self-contained NMEA 2000 NetworkIntegrated Termination Resistors8x NMEA 2000 dropsRuggedized, flame retardant over-moulded housingMetal coupling nutsIntegrated EMI shieldOrange, UL Rated,...

Self-Contained Boat Network - Complete Network for 4 Devices with Internal Terminators and Power FeedInstalling small NMEA 2000® networks is quicker and easier than it’s ever been with the Self-contained Boat Network (SBN-1) from Actisense.The...

Self-Contained Boat Network - Complete Network f/8 Devices w/Internal Terminators & Power FeedInstalling small NMEA 2000® networks is quicker and easier than it’s ever been with the Self-contained Boat Network (SBN) from Actisense.The...

Actisense NMEA 2000® Small Boat NetworkModel: A2K-SBN-1Self-contained NMEA 2000 NetworkIntegrated Termination Resistors4x NMEA 2000 dropsRuggedized, flame retardant over-moulded housingMetal coupling nutsIntegrated EMI shieldOrange, UL Rated,...

Spare Shielded Cable for Connecting USB-2 to PCUSB cable accessory for use with the Actisense USG-2.*Note: The USG-2 ships with this cable included in the box, but it is also available as an accessory in case a replacement is needed.This product may not...

USB to Serial Adapter for PRO Range & EMU-1 ProductsSerial to USB cable assembly.*Note: this accessory is only suitable for use with Actisense PRO range products. To safely transfer NMEA 0183 data to a PC from another manufacturer's device, the...

USG-2 Isolated USB To Serial Gateway For Use w/NMEA0183, RS422 And RS232The USG-2 ensures safety and reliability when connecting a PC to your NMEA 0183 network.The USG-2 converts a USB port into a bi-directional serial port suitable for connecting to a...

B150M Bronze 0 Degree Thru-Hull 300W 8-PinAs CHIRP continues to redefine recreational fishing, AIRMAR has expanded its lineup of broadband transducers to satisfy the growing demand for this game-changing technology. New to the market is AIRMAR’s...

10-Conductor In-Line Cable Splice - IP67Airmar CHIRP transducers are made with cables ending in a bare wire connection. Some sounders have internal terminal blocks to which these bare wires can be connected, but many CHIRP fishfinders and sounders use...

11-Pin Low-Frequency Mix & Match Cable for RaymarineSome CHIRP transducers are now made as Mix and Match models. These versions have a common base transducer with an attached 9-meter cable, plus an interchangeable short (1-meter) brand-specific...

117WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They...

117WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings.You can use wrench 117WR-4 to brace the housing when using this wrench.For use with:B117 B150 B744V B744VL B765C SS555