CMC MARINE LLC

Cmc Marine Llc 1/4"-20 X 1/2"Flathd Socket 52070

Cmc Marine Llc 1/4"-20 X 1/2"Flathd Socket 52070

Cmc Marine Llc 10" Set Back Hydraulic W/Gauge 61001

The PL-65-10 is rated for V-6 and smaller motors and provides 5" of vertical travel.

Cmc Marine Llc 10" Set Back Hydraulic W/O 61002

The PL-65-10 is rated for V-6 and smaller motors and provides 5" of vertical travel.

Cmc Marine Llc 10" Set Back Manual 61012

Your boat reacts differently depending on the engine height. Using a jack plate gives you more control over your engine height and provides the optimum performance for your boat on the water. It...

Cmc Marine Llc 2 1/2" Set Back 65213

The 2 1/2" Static Set Back Plate has 11/2" of adjustment at the transom. It is most commonly used in conjunction with the 5 1/2" set back manual or hydraulic Power-Lift to give a total of 8" of set...

Cmc Marine Llc 3 Wire Harness 7014G

A wire harness, also known as a cable harness or wiring assembly, is a collection of wires, cables, or subassemblies used to transfer signals or electricity. A basic Wire Harness may have three...

Cmc Marine Llc 5" Vertical Extension 50012

Do you have plans to ride your boat on shallow waters but are afraid that your propeller might get stuck on sand or mud? Does your boat seem to be running slower than it should be on shallow waters?...

Cmc Marine Llc Adapter Kit For Transom Clamp 13022

If your motor has a clamp that clamps inside the splash guard, you will need to purchase this mirror clamp adapter to mount it on a tilt and trim unit or socket plate for standard full-size motor...

Cmc Marine Llc Bottom Transom Washer Plate 20032

We are constantly striving hard to develop innovative and new products to offer our OEM and After-Market customers and bring these products to market quicker than any other manufacturer. We have a...

Cmc Marine Llc Break Away Plate 13003

Read CMC Marine's Warranty Policy HereThe CMC BA-130 Breakaway unit is designed for duck hunters and/or fisherman that use their boat in shallow stumpy areas. It allows small boats and motors to...

Cmc Marine Llc Cmc 4" Polished Set Back 40012

The two-piece adjustable manual has 5" of slot adjustment at the motor mounting bracket and 11/2" of adjustment at the transom bracket.

Cmc Marine Llc Cmc 5 1/2" Polished Set Back Plate 55012

The two-piece adjustable manual has 5" of slot adjustment at the motor mounting bracket and 1 1/2" of adjustment at the transom bracket.