Fuel Filters

A check valve is a device that only allows fluid to flow in one direction. There are two ports on this valve: one for the media inlet and one for media output. A check valve's principal purpose is to prevent backflow in the system. Because they only...

Fuel Filter - Sierra Marine Engine Parts - 18-7709 (118-7709) is a high-quality spin-on fuel filter. Fuel flow can be restricted by clogged fuel filters, robbing the engine of performance and efficiency. Regularly changing the filter can help you get the...

Water separation, fuel filtering, and maximum fuel flow are necessary for high-performance fuel-injected engines. Sea-Star Solutions' new filter elements are designed for today's 2-cycle and 4-cycle outboards and deliver all three of these essential...

An effective arrangement for the initial separation of water and particulate matter in a lower chamber is part of a combination fuel filter and water separator that is particularly useful at the upstream; suction side of a fuel pump. The fluid then...

FUEL FILTER - Evinrude, Johnson, and Gale Outboard Motors, E-TEC (18-7722) Sea Star Solutions removes over 99% percent emulsified water from gasoline. Sierra's 27-micron filters remove particles as small as 10 microns with an efficiency of over 90%...

High-performance fuel-injected engines require water separation, fuel filtering, and optimum fuel flow. Sea Star fuel filter assemblies are designed for today's 2-cycle and 4-cycle outboards and deliver all three of these essential performance parameters...

Fuel Filter - Sierra Marine Engine Parts - 18-79973 (118-79973) filter in a fuel line that screens out dirt and rust particles, and it's usually made up of cartridges with filter paper within. It also safeguards the engine's fuel efficiency and...

Fuel Filters - Mercury - Sierra Marine Engine Parts - 18-7967 (118-7967) Fuel filtration, water separation, and optimum fuel flow are essential for high-performance fuel-injected engines. Sierra's new filter elements satisfy all three of these critical...

The FLOAT KIT from SeaStar Solutions is for use with Mercury maritime applications. It works with the following carburetors: WM-3, 5, 6, 8, 9, 10, 11, 12, 13, 13A, 14, 15, 15A, 16, 16A, 17, and 18. It can also substitute for Mercury Marine's 1395-6197...

Sierra's E-GO! 18-8606 Traditional mineral-based or PIB (polyisobutenamine) cleansers do not clean as well as Fuel Injector Cleaner. Immediately cleans all types of fuel injectors (port or direct injection). Use for cleaning combustion chamber deposits...

This under-cowl, in-line fuel filter replaces contaminated filters on many Mercury and Mariner outboards, and it is under the engine cowl. It will also fit into a MerCruiser fuel filter housing. It also fits Verado L4 and L6 filter housings (serial...

MPI & EFI engines with boost pump, 8.1L & 496 CID for 3/8" I.D. fuel linesThis product replaces:47-7721, 808282180386, 9-37826