MARINE MACHINING & MFG.

Marine Machining & Mfg. 1-12 Sae Nylock Nut 1-12 Nylock Nut

For prop end of shaft.

Marine Machining & Mfg. 1/2" Brass Shaft Key 1/2" Brass Key

The 1/2" BRASS SHAFT KEY (1/2" BRASS KEY) square keys are small, uniformly-sized bars that limit the relative rotation of a shaft and a hub. They can be any length but must have the same height and...

Marine Machining & Mfg. 1/2" Ss Shaft Key 1/2" Sst Key

The 1/2" Stainless Steel SHAFT KEY (1/2" SST KEY) is constructed with high-quality stainless steel that prevents easy deterioration in the harsh marine environment. It has a high tolerance and a...

Marine Machining & Mfg. 1/2-13 Sq. Head Set Screws 1/2-13 Setscrew

Drilled and heat treated.

Marine Machining & Mfg. 1/4 Lb Spool Ss Safety 1/4# Tie Wire

This stainless spool is used in coupling screws reinforcing fasteners and other parts for stability during use. It provides a reliable, built to withstand large forces on them. Broken connections and...

Marine Machining & Mfg. 1/4" Brass Shaft Key 1/4" Brass Key

Metric Shaft Keys are rectangular or square keyways that fasten rotating components to a shaft. Shaft Keys are placed into slots cut in a pulley or sprocket to put together a spinning assembly. A...

Marine Machining & Mfg. 1/4" Ss Keystock (1Ft.) *Wsl* 1/4 Sst Key(12")

A pulley, gear, sprocket, or other rotating power device's hub and a shaft are connected by a small metal block or wedge known as a keystock. It generates driving torque while impeding motion. A key...

Marine Machining & Mfg. 1/4" Ss Shaft Key 1/4" Sst Key

The 1/4" Stainless Steel Shaft Key (88-602) square keys are short bars that can be any length but have the same height and width, and they're used to restrict relative rotation between a shaft and a...

Marine Machining & Mfg. 3/16" Brass Shaft Key 3/16" Brass Key

Using a keyed joint, shaft keyways and keys are used to transfer torque from shafts to mechanical transmission components like gears, pulleys, etc. They can be produced either using a conventional...

Marine Machining & Mfg. 3/4-10 Sae Brass Nylock Nut 3/4-10 Nylocknut

For prop end of shaft.This product replaces:88-002, 11-29594

Marine Machining & Mfg. 3/8" Brass Shaft Key 3/8" Brass Key

Most propeller shafts use keys to transmit torque from it to the propeller. The brass key is a long, thin rectangle of metal that runs the length of the shafting and slides into a keyway or slot that...

Marine Machining & Mfg. 3/8" Ss Shaft Key 3/8" Sst Key

A keyed joint shaft keyways and keys transfer torque shafts to mechanical transmission components like gears, pulleys, etc. They can be produced using conventional stock material, like key stock, or...