Hardware and Accessories

The purpose of thrust washers is to make sure you have enough space between the gearcase and the prop hub. They ensure that the prop and driveshaft splines have enough room to connect. The thrust gives a hard surface for the splined sleeve so the proper...

Volvo Penta Exploded view / schematic Duoprop Propeller, Stainless Steel, C Series

A good prop hub should keep the propeller perfectly centered on the prop shaft, suppress vibrations, and prevent the shaft from the tremendous shock of impacting something submerged with the propeller. Volvo Penta Hub - Rear D&F Duoprop (3851259)...

30 mm socket wrench for replacing aft propellers on Duoprop?X, DP-S and DPX drives.This product replaces:3862808-7

Volvo Penta is one of the world's leading providers of marine and industrial power solutions. Volvo Penta provides solutions holistically designated to move engine owners driven by innovation with the collaboration of customer satisfaction. Volvo Penta...

The requirement for thrust washers arose practically as soon as the wheel was established in antiquity. When the bearing that handles the radial load, such as a bushing or roller bearing, does not have particular provisions for axial or thrust loads,...

The Volvo Penta Hub Front - D&F Duoprop (3851258) acts as a stress absorber between the prop blades and the shaft. It improves the performance of the propeller system. Suspension technology aids in support of the body. A good prop hub should keep the...

Are you tired of having a loose bolt? Have you already tried putting adhesive, but you can still hear some vibrations? No washers or not using high-quality washers may result in shifting or movements during the tightening process. This movement changes...

Nothing is worse than dinging a prop when out on the lake for the day?žll, losing the only wrench you have to fix the damaged prop is worse. To assist you in removing and remounting Volvo Duo Props, purchase our PROP TOOL Kit (D&F SERIES) Volvo Penta...

Get your boat up and running quickly with a front tab washer for your DP 280 and DP 290 drives, which firmly hold the prop shaft in place when the bolts are tightened. Prop attachment hardware is also available for drives with Type A, B, C, and D...

The H' HUB LARGE BORE (22754753) is a high-quality front-rear propeller hub. Found in the center of a propeller (front), wherein the blades are attached and the propeller's connected to the engine. Its bearing attaches the hub to the tail shaft. A...

For replacing Duoprop?PX ?×ö Series propellers. Also used for A, B & C Series propellers using cone kit #872549 and nylock nut for forward propeller. Contains: (1) wrench #3851615 and (1) 18 mm socket wrench.This product replaces:885195, 885195-8,...