Inboard Hardware and Accessories

Anchor Bushing, Inc. 2 1/2" To 2" Nylon Nb17

With an operating temperature of roughly 250??F, nylon bushings are self-lubricating and non-galling. Chemically, they are weak in the presence of sturdy acids but excel in the presence of hydrocarbon and alcohol. The Anchor Bushing Nylon Propeller Bore...

Anchor Bushing, Inc. 1 1/2" X 1 1/4" Nb10

Bore Reducers fit into a spinning component's borehole and reduce the bore diameter to a smaller size. Having similar bore diameters on both ends can be converted to combination bore couplings fast and cheaply. A shaft diameter reducer when being...

Anchor Bushing, Inc. 2"To 1-1/2" Bronze Reducer Bb14

Standard marine taper and come with brass step keys.This product replaces:88-14, BB14

Anchor Bushing, Inc. 1" To 7/8" Nylon Anchor Nb3

The propeller may need to be changed due to wear, corrosion, or damage. A bore reducer can repair the problem if the new propeller does not fit the shaft-Anchor Bushing's 1" to 7/8" D Nylon Propeller Bore Reducer (NB3). There is a stepped-down key...

Anchor Bushing, Inc. 1 1/2" To 1 3/8" Anchor Nb11

Anchor Bushing's Nylon Propeller Bore Reducer (NB11) goes from 1-1/2" to 1-3/8"D. This high-quality item is professionally crafted following industry standards to provide a well-balanced design a high level of craftsmanship. It is intended by using...

Anchor Bushing, Inc. 1 1/4" To 1 1/8" Nylon Nb7

Nylon Bore Reducers is the easy way to fix a propeller with a bigger bore than it should be or reduce propeller bores to fit smaller diameter shafts. Propeller bore lowering bushings from Anchor Bushing convert a bigger bore inboard propeller to a...

Anchor Bushing, Inc. 1 1/4" To 1" Nylon Nb6

1 1/4" TO 1" NYLON (NB6) is a high-quality bore reducer made with the highest level of craftsmanship. Anchor Bushing's propeller bore lowering bushings reduce the diameter of a larger bore inboard propeller shaft. The product is made of the...

Anchor Bushing, Inc. 1 1/8" To 1" Nylon Nb5

Nylon Propeller Bore Reducer Anchor Bushing?1-1/8" to 1" D (NB5). This high-quality product is expertly crafted to meet stringent industry standards, resulting in a well-balanced design and a high level of craftsmanship. It is constructed with...

Anchor Bushing, Inc. 1-3/4" To 1-1/2"Bronze Reducer Bb13

Anchor Bushing 7/8" to 3/4" D Bronze Propeller Bore Reducer (BB13). This high-quality product is prepared to meet demanding industry requirements, combining a well-balanced design with a high level of craftsmanship. It is made to use top-of-the-line...

Anchor Bushing, Inc. 1 3/4" To 1 3/8" Nylon Nb12

The shock of shifting is absorbed by a 1 3/4" to 1 3/8" NYLON (NB12) bushing inside an outboard propeller hub.. Should you hit something, the bushing acts as a "breakaway," allowing the prop to spin and safeguarding drive train components such as gears...

Anchor Bushing, Inc. 1 3/8 To 1 1/8 Nb8

Boating is an excellent method to de-stress and leave your worries behind. With this high-quality marine product, you can enjoy time on the water more. Whether you're practicing simple cruising on the open ocean for fun, you'll want to make sure your...

Anchor Bushing, Inc. 2" To 1 3/4" Nylon Nb15

The shock caused by shifting is absorbed by the rubber inner bushing inside an outboard propeller hub. A reducing bushing, also known as a reducer bushing, is used to decrease or increase the size of a pipe thread. Nylon Bore Reducers are a fast remedy...