Sailing

Barton Marine Series 5 Fiddle Swivel Block - 54mm [N05430]

Series 5 Fiddle Swivel Block- 54mmPlain Bearing BlocksBarton plain bearing blocks have a precision moulded acetal sheave running on a large diameter brass bearing, ensuring free running under the highest of loads.SpecificationsSheave size: 54mm x...

Barton Marine Size 3 Vang System [N03900]

Size 3 Vang SystemFeatures:Snap Shackle Head24' Line

Ronstan Pro Splicing Kit [RFSPLICE-KIT3]

Pro Splicing KitKit Includes:Ronstan splicing bagSplicing kit, 5 fid set (4, 5.5, 7.5, 10, 13 mm)Scissors, 8" cuts Kevlar and Dyneema materialF15 puller small, 2-4 mm lineF25 puller, 6-8 mm lineSplicing tape5 piece needle setSmall Swedish fidLeather...

C. Sherman Johnson Spreader Flag Halyard Kit [40-530]

Spreader Flag Halyard KitIncludes 40ft. of polyester line, block with bail and shroud cleat.

C. Sherman Johnson Pulpit Anchor f/1" Rail [29-501]

Pulpit Anchor for 1" RailThis fitting can be used on the stern rail and bow pulpit to terminate jaw fittings for lower or upper life lines. (1/2" hole). The hole will not accept cast gate hooks. 

C. Sherman Johnson Eye to Deck Toggle Fitting [LS-2550]

Eye to Deck Toggle FittingThis fitting can be mounted to any flat surface and accept life line fittings, line, etc. Toggling action is 140 degrees. 

C Sherman Johnson Eye to Jaw Fitting [LS-2500]

Eye to Jaw FittingThis fitting will convert a small bail at the stern rail to the standard gate eye to accept the over center gate hook.

C. Sherman Johnson Eye to Eye Adjustable Fitting [22-100]

Eye to Eye Adjustable FittingThis fitting can be used wherever an eye is required on each side of the stanchion. Adjustable between 3/4" and 1". 

C. Sherman Johnson Shore Adjuster f/3/16" Wire [27-406]

Short Adjuster for 3/16" WireGenerally used at the stern rail in conjunction with the single gate eye to tension that section of the gate.Specifications:3/16" Wire1/4" Pin1" adj.

C. Sherman Johnson Short Adjuster f/1/8" Wire [26-406]

Short Adjuster for 1/8" WireGenerally used at the stern rail in conjunction with the single gate eye to tension that section of the gate.Specifications:1/8" Wire1/4" Pin1" adj.

C. Sherman Johnson "T" Style Toggle Jaw f/3/16" Wire [27-415]

"T" Style Toggle Jaw for 3/16" WireGenerally used at the stern rail when no gate is required with a turnbuckle forward.

C. Sherman Johnson "T" Style Toggle Jaw f/1/8" Wire [26-415]

"T" Style Toggle Jaw for 1/8" WireGenerally used at the stern rail when no gate is required with a turnbuckle forward.