The 13.3X17 Steel Three Blade Right Hand Rotation PROP HUSTLER (31431712) is a high-quality three-bladed thru hub exhaust propeller from the Hustler Series of Turning Point best suitable for 40hp to 150hp w/ 4-1/4-inch Gearcases. This propeller combines unique TurningPoint designs with high-quality 15-5 stainless steel alloys. With age, this metal becomes stiffer. Even at wide-open throttle, it gives maximum speed, a rapid holeshot, and secure handling, even in tight turns.
Key Features:
- Stainless steel prop constructed of 15-5 stainless steel, which hardens and strengthens over time.
- Higher rake angles increase boat lift and overall performance by tightening the vortex created by the propellers.
- Aggressive rake and cupping improve handling and boat lift.
- Progressive pitch angles that are tuned to accelerate and channel water to reduce slip and increase performance and fuel economy
- Fine-tuned vents for a quick holeshot
Specifications:
- SKU: 31431712
- UPC: 652480200724
- Weight: 11.00 LBS
- Material: Stainless Steel
- Pitch: 17?²ìi>
- Diameter: 13.3?²ìi>
- No. of Blades: 3
- Rotation: Right Hand (RH)
- Brand: Turning Point Propellers
- Condition: New
Note:
- This propeller requires the use of a Hub Kit for installation.
Engine Application
Evinrude/Johnson?40-140 Horsepower 4.25?@Ã¥arcase
2 cyl: 50hp ('71-'74) / 45 to 55hp commercial;
3 cyl: 55, 60, 65, 70hp, 75hp with large gearcase, 65hp commercial;
4 cyl: 75, 85, 88, 90, 100, 110, 115, 120 ('86-'94), 125, 135 ('73-'76), 140 ('77-'84, '86-'94) / H.O. (includes E-TEC H.O.): 60, 90, 115hp;
E-TEC: 40, 50, 60, 65, 75hp / 20" shaft: 90, 115hp (not pontoon series), 130hp ('09-'10)4 stroke: 8hp ('96+), 9.9hp ('95-'01), 15hp ('95+)
Evinrude/Johnson?60-70 Horsepower (4-Stroke) 4.25?@Ã¥arcase
4 stroke (Johnson): 60hp, 70hp
Force?75-150 Horsepower (2-Stroke) 4.25?@Ã¥arcase
75hp ('99) / 90hp to 150hp ('95+)
Honda?60-130 Horsepower (4-Stroke) 4.25" Gearcase
BF 4 Stroke: P60 / 75, 90 (?y+) / 100, 115, 130hp. (not 115D)
Honda?75-90 Horsepower (4-Stroke) 4.25" Gearcase
('95-'98): 75hp, 90hp
Mercury? Mariner?40-150 Horsepower 4.25" Gearcase
Note: Props Not Available for '77 & Older models.
(2 & 4 stroke) 40 to 60 Bigfoot / 70 ('87-'89) / 75, 80 ('78-'89), 90, 100, 115, 125, 140hp / 150 XR4/6 (thru 1993, includes equivalent Mariner Magnum I, II, III.)
FourStroke? & SeaPro? 4cyl: 40 to 75hp / OptiMax: 75, 90, 115, 125hp
Omc 1.6-3.Ol+ Horsepower 4.25" Gearcase
Cobra 400: 2.3 to 3.0L (?ø-?¸9) / Sea Drive: 1.6 to 1.8L
Parsun?60-90 Horsepower 4.25?@Ã¥arcase
T60, T75, T85, T90
Suzuki?60-140 Horsepower 4.25?@Ã¥arcase
DT 2 Stroke (?9+): 75 to 140hp / DF 4 Stroke (?x-?°9): 60hp, 70hp
Tohatsu?issan?60-115 Horsepower (2 & 4-Stroke) 4.25?@Ã¥arcase
60C, 70C, 70 (?2-?°9) / (Not BFT): 90 to 140hp / 115hp TLDI (?t+)
Tohatsu?issan?60-90 Horsepower (2 & 4-Stroke) 4.25?@Ã¥arcase
BFT ('14+): W60, 60, 75, 90hp
Yamaha 50-100 Horsepower 4.25?@Ã¥arcase
Note: If prop strikes trim tab, replace with Yamaha part #6E5-45371-10.
High Thrust: FT50, FT60 / 2 stroke: 60 to 100hp / 4 stroke: 70, 75 (?3-?±6), 80, 90 (?3-?±6), 100hp
Yamaha 75-130 Horsepower 4.25?@Ã¥arcase
Note: If prop strikes trim tab, replace with Yamaha part #6E5-45371-10.
2 stroke: 115 to 130hp / 4 stroke: 75 (?w+), 90 (?w+), 115hp
This product replaces:
- 652480200724, EX2-1317, EX1-1317
